Schnelle Lieferung
Sicher Einkaufen dank SSL
1 Monat Rückgaberecht
Filter
Connecting cable for oxygen sensors (Molex)
The connecting cable for oxygen sensors enables the connection of up to three rebreather oxygen sensors through the Molex connectors. It comes in the standard length of 1,5 meters. M12 x 1.5 cable gland, gold connections, Built in Isolation You have to set sensor termination in your Freedom if you want to use it with the cable, please follow this procedure:   New configuration items:   - in main menu "Setup / Rebreather / Cell -> 10k"   - in main menu "Setup / Rebreather / 3rd sensor ratio"   "Cell -> 10k" (default On) allows to disconnect terminators inside Freedom for sensors 1 and 2. When set to Off, sensors 1 and 2 should show full sensor voltage. "Cell -> 10k" affects only cells #1 and #2, this is why there is a "3rd sensor ratio" option to correct the cell #3.   3rd sensor ratio (default 2.00): It works as virtual amplifier for sensor 3. Allowed values are 1.00 - 3.00. You have to adjust this ratio so Freedom shows the voltage as you can measure with Freedom disconnected.   IMPORTANT: This setting is active if terminators are off ONLY ! When terminators are On, 3rd sensor works without this coefficient!

249,00 €*
Dive Soft Computer Freedom Advanced Nitrox
  The Divesoft Freedom decompression computer was specially developed in order to meet the needs of advanced recreational and technical SCUBA divers using nitrox. Advanced gauge and freediving modes are also available. The user can change the computer’s settings to fit a wide range of individual requirements.  It features a clear and legible TFT display, which allows you to easily read all essential information in conditions of poor visibility or even without a mask. The operational depth for this computer is 300m and its heavy-duty aluminum case was tested to 600m. The dive profile is visible in real time during your dive; it is recorded, can be seen in the device’s logbook and can be downloaded onto a computer, mobile phone or tablet, using the included USB cable. This USB cable is also used for charging the battery. Features: up to 3 mixtures with any fraction of oxygen Bühlmann’s ZHL decompression algorithm fully adjustable gradient factors deco stops or deco ceiling for continual decompression full color TFT display four screens during the dive including the graphical dive profile reversible display for left/right hand brightness adjustment durable aluminum body 300 m (1 000 ft) operational depth metric/imperial units depth average with the possibility to restart easy-to-use two button control rechargeable Li-Ion battery high-precision depth sensor vibrating alarms strong enough for a drysuit decompression games textile strap or bungee wrist mount log processing in the cloud or offline software version upgradeable free firmware updates USB connection and charging Freedom displays are protected by protector display overlay. You can choose from two variants of the fastening strap (35,5 cm or 42,5 cm). Freedom Advanced Nitrox contents: - Freedom Advanced Nitrox computer #8057 - USB charger 8075- bungee gum 1481 - fastening strap 1482 or fastening strap for dry suit 1483- silicon protective sleeve 0832 Features of FREEDOM versions versionmixturesairnitroxoxygentrimixSCR/CCRmodes BASIC NITROX 1 YES up to 40% NO NO NO OC, Free, Gauge ADVANCED NITROX 3 YES YES YES NO NO OC, Free, Gauge FULL TRIMIX 10 YES YES YES YES NO OC, Free, Gauge CLOSED CIRCUIT 10 YES YES YES YES YES OC, Free, Gauge,CCR 

639,00 €*
Dive Soft Computer Freedom Full Trimix
The Divesoft Freedom decompression computer was specially developed in order to meet the needs of technical divers using trimix in open circuit SCUBA. Advanced gauge and freediving modes are also available. The user can change the computer’s settings to fit a wide range of individual requirements. It features a clear and legible TFT display, which allows you to easily read all essential information in conditions of poor visibility or even without a mask. The operational depth for this computer is 300m and its heavy-duty aluminum case was tested to 600m. The dive profile is visible in real time during your dive; it is recorded, can be seen in the device’s logbook and can be downloaded onto a computer, mobile phone or tablet, using the included USB cable. This USB cable is also used for charging the battery. Features: up to 9 mixtures with any content of oxygen and helium Bühlmann’s ZHL decompression algorithm fully adjustable gradient factors deco stops or deco ceiling for continual decompression full color TFT display four screens during the dive including the graphical dive profile reversible display for left/right hand brightness adjustment durable aluminum body 300 m (1 000 ft) operational depth metric/imperial units depth average with the possibility to restart easy-to-use two button control rechargeable Li-Ion battery high-precision depth sensor vibrating alarms strong enough for a drysuit decompression games textile strap or bungee wrist mount log processing in the cloud or offline software version upgradeable free firmware updates USB connection and charging Freedom displays are protected by protector display overlay. You can choose from two variants of the fastening strap (35,5 cm or 42,5 cm). Freedom Full Trimix contents: - Freedom Full Trimix computer #8058 - USB charger 8075- bungee gum 1481 - fastening strap 1482 or fastening strap for dry suit 1483 - silicon protective sleeve 0832   Features of FREEDOM versions versionmixturesairnitroxoxygentrimixSCR/CCRmodes BASIC NITROX 1 YES up to 40% NO NO NO OC, Free, Gauge ADVANCED NITROX 3 YES YES YES NO NO OC, Free, Gauge FULL TRIMIX 10 YES YES YES YES NO OC, Free, Gauge CLOSED CIRCUIT 10 YES YES YES YES YES OC, Free, Gauge,CCR 

749,00 €*
Dive Soft Fastening strap
Fastening strap is used to attach Freedom computer on a hand. The standard length is about 35,5 cm.

12,95 €*
Dive Soft Fastening strap for dry suit
Fastening strap for dry suit is used to attach Freedom computer on a hand. The standard length is about 42,5 cm.

14,95 €*
Dive Soft Finimeter 300 bar
Dive Soft Finimeter 300 barManometer 52 mm, BAR, MAX P 300 bar, EN 250 Manometer ist mit BAR-Zifferblatt. Der maximale Betriebsdruck beträgt 300 bar. Das Manometer ist sauerstoffgeeignet. Gewinde: 7 / 16-4 UNF.

94,00 €*
Dive Soft USB charger
Ersatz-Ladegerät für Dive Soft Tauchcomputer FreedomUSB charger with high current output (1000 mA) and international wall connection (changeable plug, 100-240 VAC / 50-60 Hz). Cable with Freedom connector included. Cable suitable not only for charging, but for data transfer too.

69,00 €*
Ergonomic thermo-insulation pad
 Additional plastic ergonomically shaped thermo-insulation pad for Freedom computers. 

36,00 €*
Finimeter - Swivel Sauerstofftauglich
Finimeter Swivel kompl. mit O-RingenO2 Tauglich

2,50 €*
Freedom Closed Circuit
Freedom closed circuit is a higher version of DIVESOFT technical diving computers. It includes all features from previous versions, plus CCR on-line decompression with three oxygen cells connection possibility, constant PO2 decompression algorithm. All for nitrox and helium diluent mixtures and up to 9 off-board/bail-out gases.   The Divesoft Freedom decompression computer was specially developed in order to meet the needs of technical divers. It can be used with any type of rebreather or open circuit SCUBA. Advanced gauge and freediving modes are also available. The user can change the computer’s settings to fit a wide range of individual requirements. It features a clear and legible TFT display, which allows you to easily read all essential information in conditions of poor visibility or even without a mask. The operational depth for this computer is 300m and its heavy-duty aluminum case was tested to 600m. The dive profile is visible in real time during your dive; it is recorded, can be seen in the device’s logbook and can be downloaded onto a computer, mobile phone or tablet, using the included USB cable. This USB cable is also used for charging the battery. The Divesoft Freedom CCR can be connected to a rebreather with the included O2 sensor cable. One, two or three O2 sensors can be connected. The average pO2 value can be read on the primary screen and detailed information about each sensor, including sensor voltage, can be accessed via a separate screen. Fixed setpoint and SCR modes for different types of rebreathers are also available. Features: up to 9 OC mixtures with any content of oxygen and helium up to 8 diluents for CCR in addition to OC mixtures Bühlmann’s ZHL decompression algorithm fully adjustable gradient factors deco stops or deco ceiling for continual decompression full color TFT display five screens during the dive including the graphical dive profile reversible display for left/right hand brightness adjustment durable aluminum body 300 m (1 000 ft) operational depth metric/imperial units depth average with the possibility to restart easy-to-use two button control rechargeable Li-Ion battery high-precision depth sensor vibrating alarms strong enough for a drysuit decompression games textile strap or bungee wrist mount log processing in the cloud or offline software version upgradeable free firmware updates USB connection and charging Freedom displays are protected by protector display overlay. You can choose from two variants of the fastening strap (35,5 cm or 42,5 cm). Freedom Closed Circuit contents: - Freedom Closed Circuit computer #8059 - O2 cells connection cable 8076- USB charger 8075 - bungee gum 1481 - fastening strap 1482 or fastening strap for dry suit 1483 - silicon protective sleeve 0832

769,00 €*
Freedom connector cap.
Ersatzteil Verschlusskappe für alle Freedom ComputerFreedom connector cap.

7,95 €*
Freedom Nitrox analyzer
Freedom computer can be used as a nitrox analyzer if an oxygen sensor is attached. Just order Freedom Nitrox analyzer. The analyzer is supplied WITHOUT an oxygen sensor. Use Divesoft R22S oxygen sensor with Molex 3-pin connector (or equivalent). Oxygen sensors previously used in rebreather (type R22-D) can also be used in the probe, if they are still able to measure full range of oxygen pressures in atmospheric pressure safely. 

139,00 €*
o2 cells connection cable with fischer connector
o2 cells connection cable with fischer connector. The cable is supplied in the standard length of 1,2 metres.

189,00 €*
Protector display overlay for Freedom (2,4" display)
Protector display overlay for new version of Freedom computers (with TFT display and size 2,4"). It protects a glass from scratches. According to the supplied instructions is easy to install, nearly invisible. Kit contains the display overlay, cleaning cloth, application solution and squeegee.

18,95 €*
Silicon protective sleeve für Dive Soft Freedom Computer
Silicon protective sleeve serves to protection of your Freedom computer against to a mechanical damage. This silicone sleeve is not compatible with older models of the Freedom computer.

18,00 €*
Spare parts of USB charger
USB charger parts with high current output (1000 mA) and international wall connection (changeable plug, 100-240 VAC / 50-60 Hz).

19,00 €*
Tauchcomputertasche „POLARIS“
Tauchcomputertasche „POLARIS“ Die neue Polaris - Tauchcomputertasche mit atmungsaktivem Schaumstoff und luftdurchlässigem Deckel ist zum Transport empfindlicher Ausrüstungsgegenstände wie Kompass, Tauchcomputer, Prüfmanometer,Analyser etc. ausgelegt. Das Innenleben aus Rasterschaumstoff kann individuell auf das Equipment angepasst werden. Auch für Werkzeug oder Actioncam geeignet. 17cm x 17cm x 5cm

14,00 €*
USB Ladegerät McPower Quickcharge-Funktion
USB Ladegerät McPower, Eingang 100-240V, Ausgänge 5V/3A, 9V/2A, 12V/1,5A, 1x USB-A+ 1x USB-CPassend für alle USB-C und -A Geräte, mit SchnellladefunktionKompatibel mit Tablett / Powerbank / Laptop und anderen 5V GerätenAuch für Unterwasserkamera, Tauchcomputer, Analyser usw.kompakte Bauform Eingang 100-240V 50/60Hz Ausgang USB-A: 5V/3A, 9V/2A, 12V/1,5A Ausgang USB-C: 5V/3A, 9V/2A, 9V/2,22A, 12V/1,5A Ausgang USB-C und USB-A gleichzeitig: 5V/3A max. 20W Quickcharge-Funktion - lädt bis zu 4x schneller als Standardladegeräte (in ca. 30min von 0% auf 50%) kompatibel für Hersteller wie Apple iPhone oder iPad, Samsung Galaxy Serie, Sony, Huawei, LG oder Xiaomi kompatibel zu folgenden Apple iPhone Modellen: iPhone 12 Pro, iPhone 12 Pro Max, iPhone 12 mini, iPhone 12, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 11, iPhone SE (2. Generation), iPhone XS, iPhone XS Max, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus, Apple iPad Modelle: 12,9" iPad Pro (4. Generation), 12,9" iPad Pro (3. Generation), 12,9" iPad Pro (2. Generation),12,9"" iPad Pro (1. Generation), 11"" iPad Pro (2. Generation), 11" iPad Pro (1. Generation), 10,5" iPad Pro, iPad Air (4. Generation), iPad Air (3. Generation), iPad (8. Generation), iPad (7. Generation), iPad mini (5. Generation) oder Apple AirPods, AirPods Pro, Airpods mit kabellosem Ladecase (Gen.2)  

14,00 €*
USB Ladegerät, 230V Netzteil, 2x USB-A, max. 5V/2,4A, 12 W
USB Ladegerät, 230V Netzteil, 2x USB-A, max. 5V/2,4A, 12 WKompatibel mit Tablett / Powerbank / Laptop und anderen 5V GerätenAuch für Unterwasserkamera, Tauchcomputer, Analyser usw. 

12,00 €*