Schnelle Lieferung
Sicher Einkaufen dank SSL
1 Monat Rückgaberecht

LED Lampen mit DUAL Tank (für Lampe und Heizung)

Hier erhaltet ihr Yellow Diving LED - Tanklampen mit zweitem E/O Cord Kabel für die Heizung in verschiedenen Ausführungen.
Für alle von uns angebotenen Lampen bieten wir euch auch den Service und Ersatzteile.
Filter
LED Akkutanklampe 20 W, 2 Kippschalter, 20,8 Ah Akku , nicht trennbares Kabel am Lampenkopf, 1x E/O Cord 65cm für Heizung
YD Tankausführung: LH2021
LH20 (Classic) primary diving light series with Light-Emitting Diode (LED) lighting technology 20Watt 1700 lumens  are designed with fixed-focus light head, additional on/off switch and  heating supply E/O cable and Li-Ion battery pack available in the capacity range from 20,8Ah to 27,2Ah. Used water-tight switch on/off with rubber cap. Cechą charakterystyczną głowicy reflektora o zmiennej ogniskowej jest poświata, jaką daje reflektor, gdy skupimy światło. All the electronics is now located inside the light head, what allowed to manufacture shorter  canister and gives possibility to use the same battery canister as power supply for light heads YD series and electric heating.Goodman handle is wide enough to use with dry gloves in cold waters. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double-ender bolt-snap without a need of mounting it on the cable.  When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double-ender bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way.  The battery charger cable has long connectors with moving funnel covering the metal connector, what avoids short-circuit when connecting a charger. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport.  This type of connections makes battery pack full water-tight up to 150m. (450 fsw.)   TECHNICAL SPECIFICATIONS: - fixed focus - colour temperature: 6500°K- luminance: 1700lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- classic rubber cap switch- standard cable length 1,0m* long (or according to customer's order)- heating cable length: 65cm ( or according to customer’s order max. 1m)- head length: 16,7cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs 

967,00 €*
LED Akkutanklampe 20 W, 2 Piezo Schalter, 20,8 Ah Akku , nicht trennbares Kabel am Lampenkopf, 1x E/O Cord 65cm für Heizung
YD Tankausführung: PERCHLH2021
PERCH LH20 (Piezo) primary diving light series with Light-Emitting Diode (LED) lighting technology 20Watt 1700 lumens  are designed with fixed-focus light head, additional on/off switch and  heating supply E/O cable and Li-Ion battery pack available in the capacity range from 20,8Ah to 27,2Ah. Used water-tight piezo push-button switch. Cechą charakterystyczną głowicy reflektora o zmiennej ogniskowej jest poświata, jaką daje reflektor, gdy skupimy światło. All the electronics is now located inside the light head, what allowed to manufacture shorter  canister and gives possibility to use the same battery canister as power supply for light heads YD series and electric heating.Goodman handle is wide enough to use with dry gloves in cold waters. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double-ender bolt-snap without a need of mounting it on the cable.  When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double-ender bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way.  The battery charger cable has long connectors with moving funnel covering the metal connector, what avoids short-circuit when connecting a charger. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport.  This type of connections makes battery pack full water-tight up to 150m. (450 fsw.)   TECHNICAL SPECIFICATIONS: - fixed focus - colour temperature: 6500°K- luminance: 1700lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- classic rubber cap switch- standard cable length 1,0m* long (or according to customer's order)- heating cable length: 65cm ( or according to customer’s order max. 1m)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs * option: E/O cord 1,0m (65cm/35cm) long (or according to customer's order)                              Model Capacity - Ah Operating time – min Canister - L / Ø - cm Weight/ Weight in water - kg Charging time – h PERCH LH 2021 20,8 560 28 /  8 3,1 / 0,9 9 PERCH LH 2021 E/O 20,8 560 28 / 8 3,1 / 0,9 9 PERCH LH 2025 27,2 630 28 / 8 3,1 / 0,9 11 PERCH LH 2025 E/O 27,2 630 28 / 8 3,1 / 0,9 11

1.017,00 €*
LED Akkutanklampe 40 W, 2 Kippschalter, 40,8 Ah Akku , E/O Cord 35/65cm für Lampenkopf, 1x E/O Cord 65cm für Heizung
YD Tankausführung: LH4041.EO
LH40 (Classic) primary diving light series with Light-Emitting Diode (LED) lighting technology 40Watt 3960 lumens  are designed with fixed-focus light head, additional on/off switch and  heating supply E/O cable and Li-Ion battery pack available in the capacity range from 20,8Ah to 40,8Ah. Used water-tight switch on/off with rubber cap. All the electronics is now located inside the light head, what allowed to manufacture shorter  canister and gives possibility to use the same battery canister as power supply for light heads YD series and electric heating.Goodman handle is wide enough to use with dry gloves in cold waters. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double-ender bolt-snap without a need of mounting it on the cable.  When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double-ender bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way.  The battery charger cable has long connectors with moving funnel covering the metal connector, what avoids short-circuit when connecting a charger. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport.  This type of connections makes battery pack full water-tight up to 150m (450 fsw.)   The battery indicator shows the level of the battery charge.Labelled "LED indicator", The LED indicator is located on the rightside of the head.The LED light indicates the battery performance status and providesinformation on the current battery level.When the battery is switched on, the indicator lights in one of thefollowing modes:green, continuous: 100 % – 15 % of charge capacityred, continuous: 15 % - 5 %red, intermittent: 5% – 0,1 %   TECHNICAL SPECIFICATIONS: - fixed focus 12°- colour temperature: 3960°K- luminance: 1700lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- battery indicator- classic rubber cap switch- standard cable length 1,0m* long (or according to customer's order)- heating cable length: 65cm ( or according to customer’s order max. 1m)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs   * option: E/O cord 1,0m (65cm/35cm) long (or according to customer's order)          Model Capacity - Ah Operating time – min Canister - L / Ø - cm Weight/ Weight in water - kg Charging time – h LH 4021 20,8 325 30 /  8 3,0 / 0,8 9 LH 4021 E/O 20,8 325 30 / 8 3,0 / 0,8 9 LH 4027 27,2 390 30 / 8 3,1 / 0,9 11 LH 4027 E/O 27,2 390 30 / 8 3,1 / 0,9 11 LH 4041 40,8  570 30,5 / 9 3,9 / 1 20 LH 4041 E/O 40,8 570  30,5 / 9 3,9 / 1 20

Varianten ab 1.007,00 €*
1.457,00 €*
LED Akkutanklampe 40 W, 2 Piezo Schalter, 27,2 Ah Akku , nicht trennbares Kabel am Lampenkopf, 1x E/O Cord 65cm für Heizung
YD Tankausführung: PERCHLH4027
PERCH LH40 (Piezo) primary diving light series with Light-Emitting Diode (LED) lighting technology 40Watt 3960 lumens  are designed with fixed-focus light head, additional on/off switch and  heating supply E/O cable and Li-Ion battery pack available in the capacity range from 20,8Ah to 40,8Ah. Used water-tight piezo push-button switch. All the electronics is now located inside the light head, what allowed to manufacture shorter  canister and gives possibility to use the same battery canister as power supply for light heads YD series and electric heating.Goodman handle is wide enough to use with dry gloves in cold waters. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double-ender bolt-snap without a need of mounting it on the cable.  When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double-ender bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way.  The battery charger cable has long connectors with moving funnel covering the metal connector, what avoids short-circuit when connecting a charger. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport.  This type of connections makes battery pack full water-tight up to 150m. (450 fsw.)   The battery indicator shows the level of the battery charge.Labelled "LED indicator", The LED indicator is located on the rightside of the head.The LED light indicates the battery performance status and providesinformation on the current battery level.When the battery is switched on, the indicator lights in one of thefollowing modes:green, continuous: 100 % – 15 % of charge capacityred, continuous: 15 % - 5 %red, intermittent: 5% – 0,1 % TECHNICAL SPECIFICATIONS: - fixed focus 12°- colour temperature: 6500°K- luminance: 3960lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- battery indicator- piezo push-button switch- standard cable length 1,0m* long (or according to customer's order)- heating cable length: 65cm ( or according to customer’s order max. 1m)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs   * option: E/O cord 1,0m (65cm/35cm) long (or according to customer's order)          Model Capacity - Ah Operating time – min Canister - L / Ø - cm Weight/ Weight in water - kg Charging time – h PERCH LH 4021 20,8 325 30 /  8 3,0 / 0,8 9 PERCH LH 4021 E/O 20,8 325 30 / 8 3,0 / 0,8 9 PERCH LH 4027 27,2 390 30 / 8 3,1 / 0,9 11 PERCH LH 4027 E/O 27,2 390 30 / 8 3,1 / 0,9 11 PERCH LH 4041 40,8 570 30,5 / 9 3,9 / 1 20 PERCH LH 4041 E/O 40,8 570 30,5 / 9 3,9 / 1 20

Varianten ab 1.057,00 €*
1.107,00 €*
LED Akkutanklampe 75 W, 2 Kippschalter, 27,2 Ah Akku , E/O Cord 35/65cm für Lampenkopf, 1x E/O Cord 65cm für Heizung
YD Tankausführung: LH7527.EO
LH75 (Classic) primary diving light series with Light-Emitting Diode (LED) lighting technology 35Watt/40Watt/75Watt, 3600lm/4400lm/8000lumens,  are designed with changeable focus light head 12°-120°, additional on/off switch and  heating supply E/O cable and Li-Ion battery pack available in the capacity range from 20,8Ah to 40,8Ah. Used water-tight switch on/off with rubber cap. All the electronics is now located inside the light head, what allowed to manufacture shorter  canister and gives possibility to use the same battery canister as power supply for light heads YD series and electric heating.Goodman handle is wide enough to use with dry gloves in cold waters. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double-ender bolt-snap without a need of mounting it on the cable.  When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double-ender bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way.  The battery charger cable has long connectors with moving funnel covering the metal connector, what avoids short-circuit when connecting a charger. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport.  This type of connections makes battery pack full water-tight up to 150m (450 fsw.)   The battery indicator shows the level of the battery charge.Labelled "LED indicator", The LED indicator is located on the rightside of the head.The LED light indicates the battery performance status and providesinformation on the current battery level.When the battery is switched on, the indicator lights in one of thefollowing modes:green, continuous: 100 % – 15 % of charge capacityred, continuous: 15 % - 5 %red, intermittent: 5% – 0,1 % There are two independent LEDs module."Angles of light" indicator shows a different angle of light beam.The indicator is located on the right side of the head.The modes lights work both together or separately.LED diode provides information on the current angle of light.It lights in one of the following modes:green - 35 Watt/ 12°red - 40 Watt/ 120°yellow- 75 Watt both channels of driver together You can switch between modes by using switch on/off. When you turn the light off,you have 5 seconds to turn it on again then the mode changes. If you turn it off forlonger period (more than 5 seconds), the light will work in it's first mode (35 Watt,12°)   TECHNICAL SPECIFICATIONS: - light angle 12°/ 120°- colour temperature: 6500°K- luminance: max 8000lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- angels of light indicator- battery indicator- classic rubber cap switch- standard cable length 1,0m* long (or according to customer's order)- heating cable length: 65cm ( or according to customer’s order max. 1m)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs   * option: E/O cord 1,0m (65cm/35cm) long (or according to customer's order)          Model Capacity - Ah Operating time – min Canister - L / Ø - cm Weight/ Weight in water - kg Charging time – h LH 7521 20,8 35W/ 400 40W/ 325 75W/ 170 30 /  8 3,0 / 0,8 9 LH 7521 E/O 20,8 35W/ 400 40W/ 325 75W/ 170 30 / 8 3,0 / 0,8 9 LH 7527 27,2 35W/ 495 40W/ 390 75W/ 200 30 / 8 3,1 / 0,9 11 LH 7527 E/O 27,2 35W/ 495 40W/ 390 75W/ 200 30 / 8 3,1 / 0,9 11 LH 7541 40,8 35W/ 745 40W/ 570 75W/ 290 30,5 / 9 3,9 / 1 20 LH 7541 E/O 40,8 35W/ 745 40W/ 570 75W/ 290 30,5 / 9 3,9 / 1 20

Varianten ab 1.167,00 €*
1.347,00 €*
Side Mount LED Akkutanklampe 20 W, 2 Kippschalter, 27,2 Ah Akku , E/O Cord 35/65cm für Lampenkopf, 1x E/O Cord 65cm für Heizung
YD Tankausführung: SMLH2027.EO
LH20 SideMount (two toggle switches) primary diving light series with Light-Emitting Diode (LED) lighting technology 20Watt 1700 lumens  are designed with fixed-focus light head, additional on/off switch and  heating supply E/O cable and Li-Ion battery pack available in the capacity range from 20,8Ah to 24,8Ah. Used water-tight toggle switch. Cechą charakterystyczną głowicy reflektora o zmiennej ogniskowej jest poświata, jaką daje reflektor, gdy skupimy światło. All the electronics is now located inside the light head, what allowed to manufacture shorter  canister and gives possibility to use the same battery canister as power supply for light heads YD series and electric heating.Goodman handle is wide enough to use with dry gloves in cold waters. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double-ender bolt-snap without a need of mounting it on the cable.  When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double-ender bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way.  The battery charger cable has long connectors with moving funnel covering the metal connector, what avoids short-circuit when connecting a charger. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport.  This type of connections makes battery pack full water-tight up to 150m. (450 fsw.)   TECHNICAL SPECIFICATIONS:   - SideMount configuration- fixed focus - colour temperature: 6500°K- luminance: 1700lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- classic rubber cap switch- standard cable length 1,2m* long (or according to customer's order)- heating cable length: 85cm ( or according to customer’s order max. 1m)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs * option: E/O cord 1,0m (85cm/35cm) long (or according to customer's order)          Model Capacity - Ah Operating time – min Canister - L / Ø - cm Weight/ Weight in water - kg Charging time – h PERCH SM LH 2021 20,8 560 28 /  8 3,1 / 0,9 9 PERCH SM LH 2021 E/O 20,8 560 28 / 8 3,1 / 0,9 9 PERCH SM LH 2025 24,8 630 28 / 8 3,1 / 0,9 11 PERCH SM LH 2025 E/O 24,8 630 28 / 8 3,1 / 0,9 11    

Varianten ab 987,00 €*
1.157,00 €*
Side Mount LED Akkutanklampe 20 W, 2 Piezo Schalter, 20,8 Ah Akku , nicht trennbares Kabel am Lampenkopf, 1x E/O Cord 65cm für Heizung
YD Tankausführung: PERCHSMLH2021
PERCH LH20 SideMount (Piezo) primary diving light series with Light-Emitting Diode (LED) lighting technology 20Watt 1700 lumens  are designed with fixed-focus light head, additional on/off switch and  heating supply E/O cable and Li-Ion battery pack available in the capacity range from 20,8Ah to 24,8Ah. Used water-tight piezo push-button switch. Cechą charakterystyczną głowicy reflektora o zmiennej ogniskowej jest poświata, jaką daje reflektor, gdy skupimy światło. All the electronics is now located inside the light head, what allowed to manufacture shorter  canister and gives possibility to use the same battery canister as power supply for light heads YD series and electric heating.Goodman handle is wide enough to use with dry gloves in cold waters. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double-ender bolt-snap without a need of mounting it on the cable.  When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double-ender bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way.  The battery charger cable has long connectors with moving funnel covering the metal connector, what avoids short-circuit when connecting a charger. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport.  This type of connections makes battery pack full water-tight up to 150m. (450 fsw.)   TECHNICAL SPECIFICATIONS:   - SideMount configuration- fixed focus - colour temperature: 6500°K- luminance: 1700lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- classic rubber cap switch- standard cable length 1,2m* long (or according to customer's order)- heating cable length: 85cm ( or according to customer’s order max. 1m)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs * option: E/O cord 1,0m (85cm/35cm) long (or according to customer's order)          Model Capacity - Ah Operating time – min Canister - L / Ø - cm Weight/ Weight in water - kg Charging time – h PERCH SM LH 2021 20,8 560 28 /  8 3,1 / 0,9 9 PERCH SM LH 2021 E/O 20,8 560 28 / 8 3,1 / 0,9 9 PERCH SM LH 2025 24,8 630 28 / 8 3,1 / 0,9 11 PERCH SM LH 2025 E/O 24,8 630 28 / 8 3,1 / 0,9 11

1.037,00 €*
Side Mount LED Akkutanklampe 40 W, 2 Kippschalter, 40,8 Ah Akku , nicht trennbares Kabel am Lampenkopf, 1x E/O Cord 65cm für Heizung
YD Tankausführung: SMLH4041
SideMount LH40 (Classic) primary diving light series with Light-Emitting Diode (LED) lighting technology 40Watt 3960 lumens  are designed with fixed-focus light head, additional on/off switch and  heating supply E/O cable and Li-Ion battery pack available in the capacity range from 20,8Ah to 40,8Ah.  Used water-tight switch on/off with rubber cap. All the electronics is now located inside the light head, what allowed to manufacture shorter  canister and gives possibility to use the same battery canister as power supply for light heads YD series and electric heating.Goodman handle is wide enough to use with dry gloves in cold waters. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double-ender bolt-snap without a need of mounting it on the cable.  When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double-ender bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way.  The battery charger cable has long connectors with moving funnel covering the metal connector, what avoids short-circuit when connecting a charger. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport.  This type of connections makes battery pack full water-tight up to 150m. (450 fsw.)   The battery indicator shows the level of the battery charge.Labelled "LED indicator", The LED indicator is located on the rightside of the head.The LED light indicates the battery performance status and providesinformation on the current battery level.When the battery is switched on, the indicator lights in one of thefollowing modes:green, continuous: 100 % – 15 % of charge capacityred, continuous: 15 % - 5 %red, intermittent: 5% – 0,1 %  TECHNICAL SPECIFICATIONS: - SideMount configuration- fixed focus 12°- colour temperature: 6500°K- luminance: 3960lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- battery indicator- classic rubber cap switch- standard cable length 1,2m* long (or according to customer's order)- heating cable length: 85cm ( or according to customer’s order max. 1m)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs   * option: E/O cord 1,0m (85cm/35cm) long (or according to customer's order)            Model Capacity - Ah Operating time – min Canister - L / Ø - cm Weight/ Weight in water - kg Charging time – h SM LH 4021 20,8 325 30 /  8 3,0 / 0,8 9 SM LH 4021 E/O 20,8 325 30 / 8 3,0 / 0,8 9 SM LH 4027 27,2 390 30 / 8 3,1 / 0,9 11 SM LH 4027 E/O 27,2 390 30 / 8 3,1 / 0,9 11 SM LH 4041 40,8 570 30,5 / 9 3,9 / 1 20 PERCH SM LH 2041 E/O 40,8 570 30,5 / 9 3,9 / 1 20    

Varianten ab 1.027,00 €*
1.357,00 €*
Side Mount LED Akkutanklampe 40 W, 2 Piezo Schalter, 27,2 Ah Akku , nicht trennbares Kabel am Lampenkopf, 1x E/O Cord 65cm für Heizung
YD Tankausführung: PERCHSMLH4027
PERCH SideMount LH40 (Piezo) primary diving light series with Light-Emitting Diode (LED) lighting technology 40Watt 3960 lumens  are designed with fixed-focus light head, additional on/off switch and  heating supply E/O cable and Li-Ion battery pack available in the capacity range from 20,8Ah to 40,8Ah. Used water-tight piezo push-button switch. All the electronics is now located inside the light head, what allowed to manufacture shorter  canister and gives possibility to use the same battery canister as power supply for light heads YD series and electric heating.Goodman handle is wide enough to use with dry gloves in cold waters. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double-ender bolt-snap without a need of mounting it on the cable.  When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double-ender bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way.  The battery charger cable has long connectors with moving funnel covering the metal connector, what avoids short-circuit when connecting a charger. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport.  This type of connections makes battery pack full water-tight up to 150m. (450 fsw.)   The battery indicator shows the level of the battery charge.Labelled "LED indicator", The LED indicator is located on the rightside of the head.The LED light indicates the battery performance status and providesinformation on the current battery level.When the battery is switched on, the indicator lights in one of thefollowing modes:green, continuous: 100 % – 15 % of charge capacityred, continuous: 15 % - 5 %red, intermittent: 5% – 0,1 %  TECHNICAL SPECIFICATIONS: - SideMount configuration- fixed focus 12°- colour temperature: 6500°K- luminance: 3960lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- battery indicator- piezo push-button switch- standard cable length 1,2m* long (or according to customer's order)- heating cable length: 85cm ( or according to customer’s order max. 1m)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs   * option: E/O cord 1,0m (85cm/35cm) long (or according to customer's order)            Model Capacity - Ah Operating time – min Canister - L / Ø - cm Weight/ Weight in water - kg Charging time – h PERCH SM LH 4021 20,8 325 30 /  8 3,0 / 0,8 9 PERCH SM LH 4021 E/O 20,8 325 30 / 8 3,0 / 0,8 9 PERCH SM LH 4027 27,2 390 30 / 8 3,1 / 0,9 11 PERCH SM LH 4027 E/O 27,2 390 30 / 8 3,1 / 0,9 11 PERCH SM LH 4041 40,8 570 30,5 / 9 3,9 / 1 20 PERCH SM LH 4041 E/O 40,8 570 30,5 / 9 3,9 / 1 20

Varianten ab 1.077,00 €*
1.127,00 €*
Yellow Diving Thumb Loop for Goodman handle
Yellow Diving Thumb Loop - only for YD Goodman handle Yellow Diving Daumenschlaufe - nur für YD Goodman handle passendLieferumfang nur die Kunststoff- Daumenschlaufe !

22,00 €*